Show simple item record

dc.contributor.authorMwithiga, Gikuru
dc.contributor.authorFondo, Emanuel Chengo
dc.date.accessioned2022-04-08T09:17:05Z
dc.date.available2022-04-08T09:17:05Z
dc.date.issued2008
dc.identifier.issn1815-5574
dc.identifier.urihttps://hdl.handle.net/13049/432
dc.descriptionArticle, BOJAAS, 2008en_US
dc.description.abstractCoconut oil was extracted from grated coconut using a hydraulic pressing method after the coconut gratings were preheated at heating medium air temperature in the range of 30-900C and heating durations ranging from zero to 45 minutes. Oil yields from the preheated copra indicated that adding distilled water to fresh grated copra in the ratio of 3:1 prior to heating the mixture in scaled plastic bags resulted in higher oil yield at all heating temperatures when compared to unheated copra. The oil yield also increased with increase in healing medium temperature up to 700C but declined with any further rise in heating medium temperature. Lowering the moisture content by drying copra in an air oven at 400C followed by oil extraction resulted in an increase in oil yield. It was noted that the oil yield increased with increase in the duration of preheating at all temperatures although the maximum increase was observed at heating temperatures of 50 and 600C. Grating the coconut to flakes of approximately 1mm thickness had the effect of increasing oil yield when compared to 2mm thick flakes.en_US
dc.language.isoenen_US
dc.publisherBotswana University of Agriculture & Natural Resourcesen_US
dc.relation.ispartofseriesBotswana Journal of Agriculture and Applied Sciences;Vol. 5 (1): 2008
dc.subjectCopraen_US
dc.subjectOil Extractionen_US
dc.subjectOil yielden_US
dc.subjectHeating temperatureen_US
dc.subjectheating durationen_US
dc.titleMechanical expression of oil from grated and preheated coconut meaten_US
dc.typeArticleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record